Tank inspection

The outer coating as well as the inner lining of storage tanks can be reliably and quickly tested with the ISOTEST®.

For the long-time anti-corrosion protection of vessels and storage tanks, there is a choice of various coating materials such as epoxy resin and bitumen.  By using the ISOTEST® holiday detector, flaws due to corrosion can be detected and removed at an early stage.  Appropriate accessories and a careful selection for the individual application simplify the operation and ensure the proper execution of the holiday inspection even under difficult conditions.

ISOTEST Vessel & Tank Test Kit

Part-no.: 0113510010

Scope of supply:

  • ISOTEST inspect 35 instrument complete with high voltage inspection probe including safety button
  • Instrument bag with carrying strap
  • Rechargeable battery, 6V / 4.5 Ah (VLRA) – easy to change in its own compartment
  • Charger for ELMED Pb-accumulator 100-240 V/50 Hz
  • Grounding cable 10 m with clip and instrument plug
  • Grounding cable 15 m with two clamping jaws
  • Grounding stick including 5 m cable and clamping jaw
  • Spare battery for safety button and fuse for rechargeable battery
  • Flat brush electrode with angle adjustment, length 300 mm, brass
  • Wire rake electrode, trim length 200 mm, stainless steel
  • Extension bar 500 mm with electrode chuck
  • Aluminium transportation box for ISOTEST and accessories
  • Works and calibration certificate
+49 2056 9329-0

Flash haber:

Presentation of the ISOTEST® holiday detectors at NAPEC 2019 from 10 to 13 March in Oran / Algeria

As in previous years, the 9th edition of the NAPEC (North Africa...

(daha)