Home⁄ISOTEST®⁄Industry Solutions (Test Kits)⁄Inspection of Flat Roofs & Waterproofing of Buildings

Inspection of Flat Roofs & Waterproofing of Buildings – ISOTEST® Industry Solution

Waterproofing of flat roofs & buildings with coatings or foils can be reliably tested with the ISOTEST®.

 

The condition for high-voltage holiday detection on roofs or builings is the availability of a conductive substrate or base material that allows the test voltage to flow back to the ISOTEST® device. In most cases, moisture – for example underlying roof membranes – is sufficient. The insulating coating can have a thickness of several millimeters. With our selection of suitable testing electrodes and extension rods, even large roofs and surfaces like bridges,
basins, or pools can be tested easily and safely.

ISOTEST® Waterproofing / Roof Inspection Test Kit

Scope of supply:

 

  • ISOTEST® inspect pro, test voltage adjustable 1 – 35 kV
    in steps of 0.05 kV (up to 10 kV) / 0.1 kV (from 10 kV)
  • comfortable device bag with carrying strap and viewing window
  • lithium-ion battery 14.4 V / 3450 mAh
  • charger 100 – 240 VAC
  • wire rake electrode (trim length 200 mm, stainless steel)
  • grounding cable 10 m with clamp and plug
  • grounding cable 15 m with two clamps
  • flat brush electrode with angle adjustment (length 400 mm, brass)
  • extension bar 500 mm with electrode chuck
  • extension bar 500 mm without electrode chuck
  • robust transport box

(Alternative with ISOTEST® inspect 35)